LitePad Anton/Bauer Cheeseplate Assembly
Allows for the attachment of any Anton/Bauer style battery (sold separately)
Attaches to the yoke of the LitePad Vector
- LitePad Anton/Bauer Cheeseplate Assembly292000808400
Products on this page may not be available in your region.
LitePad Vector is the light fixture cinematographers, gaffers, videographers, lighting directors and photographers choose for on-location lighting. LitePad Vector Daylight creates the same soft, even illumination that LitePad is known for, at a fixed color temperature of 6000K, while producing four times the output of its 12"x12" LitePad predecessors. The unit's light-weight, compact form-factor makes LitePad Vector the ideal lighting solution for interviews, documentaries and television/feature film productions. Thanks to its on-board dimming and its compatibility with standard Anton/Bauer or V-Mount battery packs, the LitePad Vector easily goes everywhere a flattering, soft light is needed.
LitePad Vector produces incredibly bright light output that is soft and flattering - without external diffusion. Vector is able to produce 1500 Lux at 1m with a CRI of up to 93 - which will beautifully illuminate scenic elements and render gorgeous skin tones on camera.
LitePad Vector's 8" x 8" LED engine is encased in an anodized, aluminum housing that is only 2.75" thick. The unit has on-board dimming controls, and with optional accessories like a rain cover for wet locations, the compact LitePad Vector will create beautiful illumination wherever it's needed.
Weighing only four pounds, LitePad Vector was designed for mobility. Using a universal, 100-240VAC power supply, and consuming a meager 65W of power, the fixture can be plugged into any outlet around the globe. Couple that with its ability to run off of standard Anton/Bauer and V-Mount battery packs, and the LitePad Vector is ready to go everywhere you need it to.
What's In The Box
LitePad Vector Daylight LED fixture with yoke and 100-240VAC power supply
5/8" (16mm) light stand receiver
Dimensions & Weights
Width |
Length |
Depth |
Weight |
|
Dimensions (excluding yoke) |
8.25" (210 mm) |
8.25" (210 mm) |
2.82" (72 mm) |
4.3 lbs (1.95 kg) |
Dimensions (including yoke & receiver) |
9.7" (246 mm) |
12.5" (318 mm) |
2.82" (72 mm) |
4.5 lbs (2.0 kg) |
Optical
Color Temperature: 6000K
Photometrics
Parameter |
|
Lux @ 1m |
1700 |
Color Metrics
Parameter |
|
CRI Ra |
86 |
R9 |
65 |
CQS |
85 |
Electrical
Input Voltage: 12VDC
Power Supply: Universal 100-240VAC input/12VDC-24VDC output
Power Consumption: 65W
Data: DMX 512 - RJ45 In/Out
Physical
Housing: Anodized Aluminum (Black)
Approvals: TUV/UL1573 and 8750
CE
RoHS
IP61 Rated
Product Number
292 00808 0056 |
LitePad Vector Daylight |
LitePad Vector Video
“What Does It Take To Destroy LitePad Vector” Video
Please complete this form
Allows for the attachment of any Anton/Bauer style battery (sold separately)
Attaches to the yoke of the LitePad Vector
Allows for the attachment of any V-Mount style battery (sold separately)
Attaches to the back of the LitePad Vector
Modifies the light output to achieve a more directional beam of light
Prevents spill from the sides of the fixture
A collection of filters for correcting, enhancing or softening the output of the Vector
One piece of four different 8"x8" filters
To learn more about OPTI-FLECS, click here
Soft, collapsible, durable enclosure which can be installed in seconds
Envelops the Vector in order to keep it dry
A crystal clear front cover that doesn't impede the output of the light fixture
Clear viewing panel at the back allows normal gaffer control of the LitePad Vector
This compact, lightweight Light Stand can hold any Rosco LitePad using the proper mounting attachment. |
Configuration: Four Risers Collapsed Length: 19.2" (490mm) Max. Height: 89.3" (227cm) Footprint Diameter: 40.1" (102cm) Max. Load: 5.5 lbs. (2.5kg) Weight: 2.4lbs. (1.1kg) |
Locking adapter for light stands with 5/8" spigot
Allows vertical or horizontal mounting
Has 3/8"-16 threaded receptor
Fits Truss pipe from 1-1/2" to 2" OD
1/2"-13 yoke bolt with washer
Black finish
A RJ-45 data cable for connecting the RoscoLED™ Control Box to a DMX Source or to daisy-chain the DMX signal from one RoscoLED™ Control Box to another.
The LitePad D-Tap Power Adapter will enable the LitePad to plug directly into any power supply with a D-Tap connector, such as Anton/Bauer and V-Mount batteries.
Load: 12VDC 5A Max.
Connectors: Female 2.1mm x 5.5mm Barrel to Male Anton/Bauer
The 4-Pin Adapter will enable the LitePad to plug directly into any power supply with a 4-Pin (12VDC) XLR connector. |
Load: 12VDC 5 Amp Max. Connectors: Female 2.1mm x 5.5mm Barrel to Male 4-Pin XLR |
The Car Adapter plugs directly into any car cigarette lighter to provide 12v DC power for any standard LitePad. |
Input: 12VDC Output: 12VDC 3 Amp |
The 10ft Extension Cable enables the LitePad to be placed farther away from the transformer. |
Load: 12VDC 5 Amp Max. Length: 10 feet (3 meters) |
The 10ft Right Angle Extension Cable is designed for use with LitePad HO+, HO90, Axiom and Axiom 90. It enables the LitePad to be placed farther away from the transformer. |
12VDC 5 Amp Max. Length: 10 feet (3 meters) |
The Y Splitter allows for more than one LitePad to be plugged into a power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads. |
Load: 12VDC 5 Amp Max. Length: 12 Inches Connectors: 2.1mm x 5.5mm DC Barrel Connections: Two |
The 4-Way Splitter allows for up to four LitePads to be plugged into one power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads. |
12VDC 5 Amp Max. Length: 12 Inches Connectors: 2.1mm x 5.5mm DC Barrel Connections: Four |
A mobile way to stabilize your lighting setup
An innovative way to strap supporting weight to your LitePad Light Stands without sandbags
Insert your own filled water bottle into the holder & strap it to the light stand using the carabiner
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs